Ambient Reverb 7

VST2, VST3, AU version release 7
Copyright © 2013 - 2025 Stone Voices
https://stone-voices.ru
All rights reserved.

Ambient Reverb plugin acts on the principle of high-quality algorithmic reverb with the calculation of sufficiently dense in time sound reflections, which allows to obtain realistic reverb without granulation effect.

Reverb or reverberation can be seen as a series of echoes so dense that they cannot be distinguished from each other, provided that the intervals between the reflected signals are less than 100 ms. With an increase in the interval between incoming sounds over 100 ms, the subjective perception of a person marks a separate echo.

It is intended primarily for working with sound material in the ambient genre, although it can be successfully applied to other musical styles and directions. A distinctive feature of the plugin is a wide range of reverberation time (up to 100 seconds), which allows you to get different types of reverb in nature, as well as the ability to literally freeze sounds, while receiving interesting sound pads, like Frippertronics.

In the latest 7th version, the ability to smoothly adjust the "Size" parameter has been added, as well as the modulation of delay lines from an ultra-low frequency oscillator (LFO). Another feature of the new version is the separation of the input signal into mid and side components, which allows you to select one of these components in the required proportion using the "Split" parameter for reverberation processing, as well as pre–panamination. These functions are undoubtedly important in professional audio work.

Features:
  • High quality reverb algorithm.
  • Low CPU usage.
  • 64-bit sound processing (double precision).
  • Smooth parameter adjustment.
  • Signal processing before reverberation.
  • Freeze mode with the ability to block input.
  • Wide range of decay time 0.1..100 s.
  • Two band parametric equalizer.
  • Meters and controls of input/output levels.
  • Vector graphics and resizable GUI.
  • 40 factory presets.
  • Functions for working with presets and banks.
  • Online help.
  • Bonus 👍🏻: Activation on three devices for one license.
Requirements:
  • Windows 8, 10, 11 x86-64.
  • mac OS 10.11 and later.
  • DAW with support for VST plugins.
  • Default Web Browser.

Installation

Please read carefully the terms of this License Agreement before installing or using the Ambient Reverb 7 plugin. By installing, copying, or starting the use of the Ambient Reverb 7 plugin, you hereby consent to the terms of this License Agreement:

SOFTWARE LICENSE AGREEMENT

Ambient Reverb 7

This Software License Agreement ("Agreement") is entered into between Stone Voices ("Licensor") and the individual or entity ("Licensee") acquiring the right to use the software. By using the software, the Licensee agrees to the terms of this Agreement. If the Licensee does not agree to these terms, the use of the software is prohibited.


1. Subject of the Agreement

1.1. The Licensor grants the Licensee a non-exclusive, non-transferable license to use the software product "Ambient Reverb 7" ("Software") under the terms set forth in this Agreement.

1.2. The Software includes executable files, documentation, libraries, and other related materials.


2. Rights and Restrictions

2.1. The Licensee is entitled to:

  • Install and use the Software on one or more devices according to the purchased license.

  • Use the Software solely for personal or commercial purposes, if explicitly permitted by the Licensor.

2.2. The Licensee is not entitled to:

  • Copy, distribute, transfer, or sell the Software to third parties.

  • Modify, decompile, disassemble, or otherwise attempt to extract the source code of the Software.

  • Use the Software to create competing products or services.


3. Payment

3.1. The Licensee is obliged to pay the license fee in accordance with the rates specified on the Licensor's website or in the contract.

3.2. Payment of the license fee grants the Licensee the right to use the Software for the period specified in the license (if applicable).


4. License Term

4.1. The license becomes effective upon payment and remains valid indefinitely unless otherwise specified in the purchase terms.

4.2. The Licensor reserves the right to terminate the license in case of a breach of the terms of this Agreement.


5. Warranties and Liability

5.1. The Licensor provides the Software "as is," without any express or implied warranties, including but not limited to warranties of merchantability and fitness for a particular purpose.

5.2. The Licensor shall not be liable for any direct, indirect, incidental, or special damages arising from the use or inability to use the Software.


6. Confidentiality

6.1. The Licensee agrees not to disclose any confidential information related to the Software, including but not limited to source code, algorithms, and methods of operation.


7. Termination of the License

7.1. The Licensor may terminate this Agreement in the event of a breach of its terms by the Licensee.

7.2. Upon termination of the license, the Licensee must cease using the Software and delete all copies from their devices.


8. Governing Law

8.1. This Agreement is governed by the laws of the country in which the Licensor is registered.

8.2. Any disputes arising out of this Agreement shall be resolved through negotiations, and if no agreement is reached, through litigation.


9. Miscellaneous

9.1. The Licensor reserves the right to amend this Agreement. The Licensee will be notified of any changes via the official website or email.

9.2. If any provision of this Agreement is found to be invalid, the remaining provisions shall remain in full force and effect.


The Licensee acknowledges that they have read and agree to the terms of this Agreement.

 

Installation procedure:

Windows

Depending on the required bit depth version of the plugin and the VST version, select the file in the appropriate distribution folder and copy to you VST-plugin folder. If you find it difficult to select the folder to which you want to copy the plugin file, use the table below:

Format Version Path Extension
VST2 32-bit C:\Program Files (x86)\VSTPlugins
C:\Program Files (x86)\Steinberg\VSTPlugins
C:\Program Files (x86)\Common Files\VST2
.dll
64-bit C:\Program Files\VSTPlugins
C:\Program Files\Steinberg\VSTPlugins
C:\Program Files\Common Files\VST2
C:\Program Files\Common Files\Steinberg\VST2
VST3 32-bit C:\Program Files (x86)\Common Files\VST3 .vst3
64-bit C:\Program Files\Common Files\VST3

We do not recommend installing several versions of the Ambient Reverb plugin in your system. This can cause collisions when using the plugin.

macOS

On macOS, you can install plugins to either the Macintosh HD Library folder or your user account's Library folder. It is advisable to place plug-ins in the Macintosh HD Library so that all users of the computer can access it. Paths to folders with plugins can be like this:

Format Path
VST2 /Library/Audio/Plug-Ins/VST
/Users/[your username]/Library/Audio/Plug-ins/VST
VST3 /Library/Audio/Plug-Ins/VST3
/Users/[your username]/Library/Audio/Plug-ins/VST3
AudioUnits (AU) /Library/Audio/Plug-Ins/Components
/Users/[your username]/Library/Audio/Plug-ins/Components

 

After copying the plugin file to the destination folder, you may need to scan for new VST plugins, depending on the DAW you are using.

Attention, due to Apple's current policy regarding developers from Russia, the plugin is not signed and not notarized, so if you have problems installing it, we recommend running the following command in the terminal:

sudo xattr -rds com.apple.quarantine [full path to plugin]

Where [full path to plugin] is the full path to the installed Ambient Reverb plugin.

First launch and activation of the plugin

If you have installed the plugin correctly and it has become available in your DAW, you will be able to hear the reverb when you first start the plugin. However, access to the plugin's user interface will be blocked until you activate the plugin. To activate the plugin, you must first purchase a license by clicking on the "Buy Ambient Reverb" link. Then, after successful completion of the transaction, you will receive a license key, which you should enter in the appropriate field. This will take you to the activation center, where you will receive an activation key for this device, which should be copied and pasted into the appropriate field of the plugin.

You can activate the plugin on three different devices for the same license.

You can read more detailed information on working with the plugin in the help manual.


Copyright © 2013 - 2025 Stone Voices